2011 Mercury ProXS 225 HP 1226P73ED - 1B867912
Hit something in the water last night just after planning off and beginning the trim up, guessing 30mph and 4000-4500 rpm. I let off the foot on the surprise of the hit and motor quit about 10 seconds later. Once it was off, never fired again. Turns over as normal, just not firing. Checked kill switch, seems to work fine as it turns over with less loading. Checked throttle position and seemed to be working correctly and would only turn over in neutral. Disconnected battery power for a couple minutes to see if a reset occured, nothing. Hand spun prop without any noticeable issue or wobble or scarring of prop.
Any ideas where to start? Currently planning to pull the flywheel if I can to see if the key broke, and a spark test. TIA