I'm having an intermittent misfire/ rough running issue with my port motor (0T135707). Here's the situation, when you first turn the key, it fires right up but she stutters a little bit for the first minute or two of running. Then, she smooths out with a stutter once every 30 secs to 2 minutes. I checked the fuel/ air (80/90 PSI), no codes on the Rinda tool, did cylinder drop test (everything good), and I even swapped BOTH the coils and wires from the starboard motor, yet she is still doing the same thing. I replaced the tracker valve on this motor last August because she was leaking and dumping fuel into the air side. I want to say it's a broken reed, but I feel like a broken reed wouldn't smooth itself out after idling a while. Here's what I think, it could very well be a pin hole leak in the diaphragm in the air pressure regulator or fuel pressure regulator. What are your thoughts here? Should I just leave it?