-
Anyone running a fury on an HPDI?
Have a Ranger Z520 and Yamaha HPDI 250, wondering if the fury prop would do well with that combo. Just can’t find a T1 25p anymore. Open to suggestions and appreciate the help.
-
I have a 26P fury 4 on my HPDI - 21' stratos, works great. best overall prop ive ever had. 8 vent holes really let you dial it in.
-
Not sure why but have talked to a few people who say Yamahas don’t like 4 blades. I’m not even really sure what they mean by it.
-
Sheepdog
My buddy just put a 25 Fury 3 on his 225 HPDI powered Skeeter, he loves it.
-
Anyone have a problem running them a little higher than they would be ran on a Merc? My prop to pad height right now is 2.5in, just worried about surfacing and slinging an ear.
-
Moderator
The smaller diameter Fury3 "14in" needs to run much deeper than the large diameter T1... The Fury4 has a larger diameter "14.5" and should run almost as high as the T1... With good bow lift. Big Block Yamaha's like lots of blade area.
-
Do you think this combo would do well with my Ranger/Yamaha?
-
Moderator
I’m not a fan of the fury three blade.
-
You can get a 25 T2 from Yamaha which is supposed to be the same as a 25 T1 but has a different barrel.