Results 1 to 2 of 2
  1. 04-14-2019, 05:57 PM #1
    GHawk
    GHawk is offline
    Member
    Join Date
    Jul 2012
    Location
    Raymore, MO
    Posts
    109

    Jack plate height on 2013 Z9

    I just bought a 2013 Z9 with a 250 Pro XS with 68 hrs. I test drove it in the rain and everything seemed good, didn't top it out because of the rain and rough water. I took it out yesterday and could only get 55 mph at 5100 RPM's. It's running a fully vented 25P Fury. My guess is the jack plate is too low. It also has two 12' Talons. Where should the center line of the prop shaft be on a Z9 in comparison to the bottom of the boat? Thanks guys!!
    Reply With Quote Reply With Quote
  2. Flippin 416
    Flippin 416 is offline
    Member
    Join Date
    Aug 2009
    Location
    Dover, Ohio
    Posts
    5,329
    #2 04-15-2019, 05:56 AM
    3.5" is a good place to start
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »