Wondering what the best pad to prop distance for my boat. 4 in man jack plate, 26 raker 2.
Thanks, Bill
Wondering what the best pad to prop distance for my boat. 4 in man jack plate, 26 raker 2.
Thanks, Bill
I know my G2 is liking running higher - I think I'm somewhere around 2.75, but I'm adjusting on the fly depending on conditions. If I get my motor too low I get wicked chine walk.
2020 Ranger Z519 | 2020 Mercury Pro XS 225 4S | Helix 10SI | Helix 10 MDI G3N | Helix 10 MDI G3N | Noco GENIUS 10X4
Fury 3 22P True Pitched | Power Pole Pro 2's | Ghost TM | Mega 360 | MEGA LIVE | Atlas 8in Jack Plate | Trick Step | 3X Amped 80ah Lithiums
"Never argue with an idiot; He will beat you to death with stupidity"
Thanks for the replies guys. What rpms should I turn?
Top end? 5800-6000.
John Clark — Findlay, Ohio
I'm running a new g2 on the 521 L with the manual Jack plate. The motor only has a few hours on it. 67.5 is the top end at 5700 running the 26 Raker. What speed increase could I expect with the Atlas jack plate
18 Ranger 521L 50th Anniversary Ed /Evinrude G2 250HO
With the proper height, you should likely be able to turn it to at least 5800. And you should pick up a few mph. The 21’s are a little slower than the 20’s but my Z520 will run 75 tourney loaded with my partner in the boat. We both weigh 230. You should be able to bump 70 at least.