where is the best place to mount the transducer for registering your speed, depth, and side imaging?
where is the best place to mount the transducer for registering your speed, depth, and side imaging?
Mine is directly under the jackplate just above the drain holes on the transom
I've 2 on my 221. I mounted 1 at the bottom where the previous transducer was. Perfect images and reading bottom at 70 MPH.
The other I attached to my CMC jack plate. I use one unit for mapping and the other for Sonar (TI 9" units). I spent months debating where to mount these transducers and hours looking at pictures. I didn't want to drill any new holes in the boat. They both look factory and work great. Good luck, I know what your going through.
i used a piece of 1.5 x 1.5 galvanized angle iron, welded the transducer bracket to it, and mouted the angle to the jackplate with 1/4" ss bolts, works great and wont rust...
can you guys post any pics of how you mounted them---mine will not read at speed where it is mounted thanks
1988 Ranger 364V
150HP Merc Black Max