bass boat1.JPGbass boat2.JPGbass boat3.JPGbass boat4.JPGbass boat5.JPGbb6.JPGbb7.JPGbb8.JPG
Finally stopped raining long enough for me to start on my front deck extension. So good so far.
bass boat1.JPGbass boat2.JPGbass boat3.JPGbass boat4.JPGbass boat5.JPGbb6.JPGbb7.JPGbb8.JPG
Finally stopped raining long enough for me to start on my front deck extension. So good so far.
Replace the livewell and both bilge pumps and removed some Through hull IMG_3824.JPGIMG_3823.JPG transducers
Wishin' I was fishin'...
1990 Ranger 374v
1996 175 HP Mariner - Magnum EFI
25p Tempest - A45 model
80 lb 24v MinnKota Maxxum
Humminbird Helix 10
Humminbird Helix 7
Garmin EchoMap 106sv w/ LS
Dual 8' Power Poles
Looks like it's coming along nicely, Chad! Great work!
Almost all the front deck is done the aluminum lids will hopefully be finished this weekend I will get all my pics together Should be painting it on Saturday morning decided to try something different I'm using a clear bedliner epoxy with flake added we'll see how it goes will also post pics of how it turns out almost done
Nice. Im wanting to cut out sidewall on rod locker, too make it wider, I was hesitant until I saw this. Since I'd also have to relocate the passenger seat. Hhuuummmm
Here are some pics kind of getting dark after wrapping up painting and removing the masking tape will get some better ones soon IMG_3996.JPGIMG_3999.JPGIMG_3998.JPGIMG_4002.JPG
In picture 4002.JPG, What is the toggle switch for ?
Trim switch just pulled out to paint. going to start final assembly this week of putting it all back together I will try to take some better pictures in better light conditions
IMG_4019.JPGIMG_4018.JPGIMG_4017.JPGIMG_4016.JPG IMG_4015.JPG. Some mor pics
In IMG_4016, what is the hole in the gunnel for?
Wishin' I was fishin'...
1990 Ranger 374v
1996 175 HP Mariner - Magnum EFI
25p Tempest - A45 model
80 lb 24v MinnKota Maxxum
Humminbird Helix 10
Humminbird Helix 7
Garmin EchoMap 106sv w/ LS
Dual 8' Power Poles
SPEAKERS
Looking good! I was going to work on mine yesterday and today, dryer problems dictated otherwise.
IMG_4037.JPGIMG_4038.JPGIMG_4039.JPG Got the trolling motor installed and started on the electrical system all the batteries in and the onboard charger
Looking good! Maybe this will give me the kick in the butt I need, to resume mine.
IMG_4043.JPGIMG_4044.JPGIMG_4045.JPGIMG_4046.JPGIMG_4047.JPGIMG_4048.JPGIMG_4049.JPGIMG_4050.JPGIMG_4051.JPG Got some more work done this week, so far carpeted the front deck and finish the carpet on the back deck. Performed the nerve-racking task of drilling holes in the new windshields sized up and carpet of the front lids I am going to see deck the middle compartment lid and the cockpit floor. I took a picture of the rub rail insert that I used it's half-inch black air brake line turned out pretty good I think. bilt the seat platform out of plywood and fiberglassed it, covered it with carpet And mounted the seats to it. Finished up about 75% of the wiring tested all the bilge pump's and live well pumps happy to report they all work I was dreading tearing all the batteries back out to get to that area so close hope to be on the water this Labor Day weekend