89 393V front deck

[Chad Mc]

bass boat1.JPGbass boat2.JPGbass boat3.JPGbass boat4.JPGbass boat5.JPGbb6.JPGbb7.JPGbb8.JPG


Finally stopped raining long enough for me to start on my front deck extension. So good so far.

[Chad Mc]

Replace the livewell and both bilge pumps and removed some Through hull IMG_3824.JPGIMG_3823.JPG transducers

[Hez]

[AdamB]

Looks like it's coming along nicely, Chad! Great work!

[Chad Mc]

Almost all the front deck is done the aluminum lids will hopefully be finished this weekend I will get all my pics together Should be painting it on Saturday morning decided to try something different I'm using a clear bedliner epoxy with flake added we'll see how it goes will also post pics of how it turns out almost done

[Skunked again]

Nice. Im wanting to cut out sidewall on rod locker, too make it wider, I was hesitant until I saw this. Since I'd also have to relocate the passenger seat. Hhuuummmm

[Chad Mc]

Here are some pics kind of getting dark after wrapping up painting and removing the masking tape will get some better ones soon IMG_3996.JPGIMG_3999.JPGIMG_3998.JPGIMG_4002.JPG

IMG_4003.JPGIMG_4004.JPGIMG_4005.JPGIMG_4007.JPGIMG_4009.JPGIMG_4009.JPG

[Skunked again]

In picture 4002.JPG, What is the toggle switch for ?

[Chad Mc]

Trim switch just pulled out to paint. going to start final assembly this week of putting it all back together I will try to take some better pictures in better light conditions

[Chad Mc]

IMG_4019.JPGIMG_4018.JPGIMG_4017.JPGIMG_4016.JPG IMG_4015.JPG. Some mor pics

[Hez]

In IMG_4016, what is the hole in the gunnel for?

[Chad Mc]

SPEAKERS

[Skunked again]

Looking good! I was going to work on mine yesterday and today, dryer problems dictated otherwise.

[Chad Mc]

IMG_4037.JPGIMG_4038.JPGIMG_4039.JPG Got the trolling motor installed and started on the electrical system all the batteries in and the onboard charger

[Skunked again]

Looking good! Maybe this will give me the kick in the butt I need, to resume mine.

[Chad Mc]

IMG_4043.JPGIMG_4044.JPGIMG_4045.JPGIMG_4046.JPGIMG_4047.JPGIMG_4048.JPGIMG_4049.JPGIMG_4050.JPGIMG_4051.JPG Got some more work done this week, so far carpeted the front deck and finish the carpet on the back deck. Performed the nerve-racking task of drilling holes in the new windshields sized up and carpet of the front lids I am going to see deck the middle compartment lid and the cockpit floor. I took a picture of the rub rail insert that I used it's half-inch black air brake line turned out pretty good I think. bilt the seat platform out of plywood and fiberglassed it, covered it with carpet And mounted the seats to it. Finished up about 75% of the wiring tested all the bilge pump's and live well pumps happy to report they all work I was dreading tearing all the batteries back out to get to that area so close hope to be on the water this Labor Day weekend