Axiom real world use
Just getting back from Alabama fishing. Went to lake Weiss. We done a mix of crappie and bass fishing. The 3d trolling for crappie was excellent and beyond useful to see how deep and the bottom contour the fish were holding on.
I graphed some bass off a shallow flat, we used 2d chirp with A scope to drop shot these fish. It ended up being a school of spotted bass we caught several keeper size bass out of this school.
We used the down vision to find brush piles holding crappie.
can you share your 3d settings, please?
I will have to look. But for the most part just default. I adjust the range for the area I want to cover. I use 3d split with down vision for trolling for crappie.
default seems to show every little thing as a return on my element unless i turn gain down. i run split screen 2d/3d and try to adjust so they show the same return, but its time intensive.
On the down vision or 2d you can see what is fish or artifact just use the 3d as another tool to get contour and fish depth in the water column. I adjust gain and sensitivity if getting alot of clutter.
there is no range adjustment for 3d, right? just depth
I believe the 3D range is for what ever range you have set on sidevision.
Try going to the Sidevision and change the range, the 3D should follow!!
will do. thanks!
Yes it's done with side view rangeOriginally Posted by Hickory Legend
...
Last edited by Jig34; 12-21-2019 at 10:45 AM.
Reply With Quote