Results 1 to 20 of 20
  1. #1
    Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432

    Where to find detwiller bolts?

    I sheared off one bolt on the side of my jackplate. The bolt is a flat top counter sinking Allen head bolt.

  2. Member skewby's Avatar
    Join Date
    Jan 2012
    Location
    spring city, tn
    Posts
    387
    #2
    fastenal
    xb-21 prosport 225 pro xs

  3. Member
    Join Date
    Feb 2006
    Location
    Elephant Butte, NM 87935
    Posts
    4,472
    #3
    Did you get the old bolt out? If so, take it with you. You might call whoever bought Detwiller, they may be able to send you one or more.
    Quote Originally Posted by Stroker250xs View Post
    I sheared off one bolt on the side of my jackplate. The bolt is a flat top counter sinking Allen head bolt.

  4. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #4
    Quote Originally Posted by Strokerdean View Post
    Did you get the old bolt out? If so, take it with you. You might call whoever bought Detwiller, they may be able to send you one or more.
    No sir. I haven’t had time to try yet but I know I lock tite it last year so I’m prolly up sh*~ creek.

  5. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Camanche Iowa
    Posts
    13,541
    #5
    I thought the same but Chris B told me to put some heat on it and it came out.
    LeaLea

  6. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #6
    Fastenal had them

  7. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #7
    heat will work good

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  8. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #8
    Quote Originally Posted by StrokerSmoker View Post
    heat will work good
    I tried to write you back bud but your inbox was full

  9. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #9
    I just used a easy out and it came right out! Thanks everyone for the pm’s and advice to get me back up and running. Toledo Bend is hell on a boat

  10. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #10
    Are you going to the rally on the red river april 25-28?

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  11. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #11
    Quote Originally Posted by StrokerSmoker View Post
    Are you going to the rally on the red river april 25-28?
    Yes Sir I’ll be around

  12. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #12
    I saw on fb boats on the water they are having a crawfish boil and taking pre-orders

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  13. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #13
    Quote Originally Posted by StrokerSmoker View Post
    I saw on fb boats on the water they are having a crawfish boil and taking pre-orders
    Not sure why they are preordering. You can buy live crawfish everywhere down here. And grocery store has them and I’ve even seen a gas station that sold live crawfish. The river is finally getting halfway normal and I’m afraid all this new rain will screw it up again

  14. Member
    Join Date
    Feb 2006
    Location
    Elephant Butte, NM 87935
    Posts
    4,472
    #14
    You ought to fish with the crawfish, not eat them. That being said they are good eating.

  15. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #15
    Quote Originally Posted by Strokerdean View Post
    You ought to fish with the crawfish, not eat them. That being said they are good eating.
    Dean will you be making it?

  16. Member
    Join Date
    Feb 2006
    Location
    Elephant Butte, NM 87935
    Posts
    4,472
    #16
    No not this year, We have a trip planned to Grand Lake the week of 4/20-4/28 unless the weather is lousy. The Red River does sound like fun.
    Quote Originally Posted by Stroker250xs View Post
    Dean will you be making it?

  17. Member
    Join Date
    Feb 2006
    Location
    Elephant Butte, NM 87935
    Posts
    4,472
    #17
    Plans changed today, leaving for grand 4-27 for a week.
    Quote Originally Posted by Strokerdean View Post
    No not this year, We have a trip planned to Grand Lake the week of 4/20-4/28 unless the weather is lousy. The Red River does sound like fun.

  18. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #18
    Quote Originally Posted by Strokerdean View Post
    Plans changed today, leaving for grand 4-27 for a week.
    I plan on going to the red river if I can get my motor back up and running. I’m in west Texas working so I haven’t had a chance to get it a shop to figure out what’s wrong

  19. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #19
    Quote Originally Posted by Stroker250xs View Post
    I plan on going to the red river if I can get my motor back up and running. I’m in west Texas working so I haven’t had a chance to get it a shop to figure out what’s wrong
    Whats going on with it?

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  20. Member
    Join Date
    May 2017
    Location
    Toledo Bend
    Posts
    432
    #20
    Quote Originally Posted by StrokerSmoker View Post
    Whats going on with it?
    It wont stay running. It never ran right after rebuild and just keeps getting worst.