Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jul 2004
    Location
    Indiana
    Posts
    321

    Quarter trim is all have?

    I have a brand new 225 four stroke with a little over an hour on it. I can only get a little more than a 1/4 trim while on plain. When i come to a stop and idle, I can raise up the motor all the way? What am I missing?
    Charley
    2019 Phoenix 919 PRO XP
    225 pro XS 4 stroke mercury 24p fury
    model # 12250033A
    motor serial # 2B599078


  2. Member Triton19x2's Avatar
    Join Date
    Jan 2010
    Location
    Rome, Ga.
    Posts
    2,678
    #2
    You have Trim & Tilt. Under a load the motor will only trim and stay in contact with the trim rams(the two smaller rods). Once you are idling or stopped the motor will Tilt which is the single large piston rod

    2019 721 ProXs 4S 250
    2B599739

  3. Member
    Join Date
    May 2013
    Location
    ontario
    Posts
    622
    #3
    ya there should be 2 rams for trim, 1 for tilt.. once on tilt motor is no longer resting on trim rams. some guages show half at full trim some 1/4 ..not the first post regarding this.
    Nitro2023 triton allure 250 proxs
    Garmin marine
    prostaff


  4. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,253
    #4
    If you would, please take a few moments to review the Announcements at the top of the Forum, and be sure to include the Required Info with your posts. Thanks!

    Are you using an Analog Instrument, or a Smartcraft Instrument(s)?


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor

  5. Member
    Join Date
    Jul 2004
    Location
    Indiana
    Posts
    321
    #5
    Smartcraft
    Charley
    2019 Phoenix 919 PRO XP
    225 pro XS 4 stroke mercury 24p fury
    model # 12250033A
    motor serial # 2B599078


  6. Mercury 3L/4 Stroke/Verado Moderator EuropeanAM's Avatar
    Join Date
    Apr 2008
    Location
    Greenville, SC (US)
    Posts
    95,253
    #6
    When properly set up your Smartcraft Trim should be right at "10" at the maximum trim.


    Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
    Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
    Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor