Got one of the echomap plus 93sv on the way. I plane on putting the CV52 transducer on the transom. I would like to put livescope and the GT34UHD on the trolling motor and run them all to the same head unit. Is this possible and what do I need to buy to make it happen.
Thanks!
nope, you can have either CV52 or GT34UHD connect sonar port, with livescope on panoptix port, you cannot have both CV52 and GT34UHD connected, it has only one sonar port
If you run the GT34UHD you have to give up 2d sonar?Originally Posted by canon
Thanks!
You should be able to run the GT34UHD with a Y-cable connecting to a GT8 or GT15 for 2D. Someone please chime in if the echomap plus models won't support that.
2015 Phoenix 819
IF you are running the GT34 UHD it will connect directly to the CV20 box and the Gt8/15 will connect direct to the EC+ unit WITH the 8-12 pin adapter cable. I had the exact setup.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
I take it there is a port to hook up the cv20 box to and the livescope box to?
The CV20 box has 3 ethernet ports.
YOU are not entitled to what I have earned!!!!!
From reading on Garmin's site. I can hook the CV52 to the transducer port. The livescope to the livescope port and the CV20 box to the network port. Does this sound right?
Thanks!
Close......yes 52 to unit, livescope ducer to livescope box, livescope box to CV20 box and EC+ unit to CV20 box with GT34UHD ducer to CV20 box.
YOU are not entitled to what I have earned!!!!!
Thanks man. Exactly what I was looking for!
Jarett
One thought, i dont think you can run side vu from both 52 and 34 at the same time.....
YOU are not entitled to what I have earned!!!!!
Looking at using the 52 with the big motor. Then switch to the 34 when I put the TM down.
Gotcha.....
YOU are not entitled to what I have earned!!!!!
Reply With Quote