Spinnerbait/Buzzbait system

[zcomanche21]

I know alot of you use this kind of storage for your baits. Has it worked out for you or have you gone back to the traditional storage boxes or bags?KIMG0637.JPG

[pabasshawk]

Do you have a venting system for your storage compartments? I do not and I have had issues with humidity and hooks rusting when I store my baits like that.

[tracer1]

I use Cook's tackle system. Never had a problem.

[zcomanche21]

Do you have a venting system for your storage compartments? I do not and I have had issues with humidity and hooks rusting when I store my baits like that.

I assume it is vented since its in the rod locker, but I'll ask the Ranger dealer tomorrow. Great question, thanks.

[RazorCat]

I use Cooks for soft plastics in the bags, and for buzzbaits on my rod locker lids. I also have a 12” lure rack screw mounted on either side of my center box. Spinnerbaits on one side, cranks and squarebills, etc., on the other side.
https://www.amazon.com/Super-Suction...N%3DB001447MXO

[Legend Chris]

I hang them and others after use to dry then store back in boxes at end of day. Putting a wet skirted jig or s-bait back in a box is asking for trouble for it and surrounding baits.

[Locknload59]

I hang mine as in your picture and have never had any issues. I like the easy access to keep them under my lid.

[krindgen]

I hardly use these at all. I'm wanting the magnet thingy type racks.

[Casslaw]

I habe 2 of the large Plano spinnerbait boxes with the little holes in them. I just can’t bring myself to leave all my stuff in my boat because she doesn’t get to live in the garage.

Also by limiting myself to 2 of the large Plano boxes it makes me limit what I bring to 5-7 of my favorite colors of each brand I use.

[catch5]

Do you have a venting system for your storage compartments? I do not and I have had issues with humidity and hooks rusting when I store my baits like that.

Me too. I ruined about 50 spinnerbaits and jigs one day.

[Bill Reynolds]

I made a spinnerbait hanger that attaches to the back of the rod handle support in my rod box. If anyone is interested in making one, PM your email address and I will send a PDF build sheet.

[RyanJ]

I hang mine just like in your picture. Plus I took 2 additional hangers and mounted on a garage wall.

[zcomanche21]

Thanks for all the responses, some good ideas.

[bayouXpress]

I tried that out on my rod and storage lockers but I must stack to much stuff cause they ended up being in the way.

[SteezMacQueen]

I tried that out on my rod and storage lockers but I must stack to much stuff cause they ended up being in the way.

same here. Still use it though. Just gotta be careful when trying to grab the net quickly!