Seems like my carb gasket is leaky...no vidio up load....ezy fix ya think.
took a look at the parts list and it 's the gasket right behind the carb,
are those gaskets separate per each carb? thinking 6 gaskets per motor?
Seems like my carb gasket is leaky...no vidio up load....ezy fix ya think.
took a look at the parts list and it 's the gasket right behind the carb,
are those gaskets separate per each carb? thinking 6 gaskets per motor?
Last edited by tav; 03-20-2019 at 10:32 AM.
They normally don't go bad unless they've been pinched after the carb has been removed for rebuilding. Make sure the 4 bolts are tight on the throttle body, tighten in an X pattern. If you have to replace them, use a dab of triple guard grease applied to the mating surface.
If I get the vidio up loaded you can see then....but cant do it.
Shoot a PM to cowtrimmer he can do it for you.
Yep, six individual gaskets.
And, if you need one, I've got an extra one sitting around here that I could send you.
Last edited by headhigh; 03-21-2019 at 12:45 PM. Reason: just because.
1998 Ranger R93
1998 Mercury 200 EFI
"Life, liberty, and the pursuit of happiness."