Black wheels

**Royer856** · 03-19-2019, 05:14 PM

Where can I get the black wheels? I’ve seen a bird with some this weekend. Not the Velocity wheels. I have those. Thanks

**DREWTICK** · 03-19-2019, 05:58 PM

most of what you are seeing on a Phoenix trailer that are black has the warrior wheel package, those same wheels wont fit a trailer that came with 14x6 wheels but you can get something close in a 14" or even a 15" and downsize your tireshttp://www.trailerandtruckparts.com/...l#.XJFzVShKiUk

**Royer856** · 03-19-2019, 06:53 PM

Thanks for the info. Sounds like I’d have to lift the trailer which I’m not in to doing. I’ll keep what I have.
Thanks again.

**Billydonwon** · 03-19-2019, 07:54 PM

My buddy had the velocity pkg and he changed his fenders over to the wider ones so he could run 18” wheels. Fenders were around $500 I believe. He did not have to raise trailer.

**haus9393** · 03-21-2019, 08:15 AM

I thought the standard wheel size on a phoenix was 15"

**DREWTICK** · 03-21-2019, 08:20 AM

factory are 14" x 5.5"

here is a Velocity in all black standard replacement
http://www.trailerandtruckparts.com/...l#.XJOO8ihKiUk

**haus9393** · 03-21-2019, 09:22 AM

interesting. I measured my velocity wheels and they were like 15" across. I guess I don't know how to properly measure a wheel. I was looking at getting these.
http://www.trailerandtruckparts.com/...l#.XJOdz2fsapo

**DREWTICK** · 03-21-2019, 09:35 AM

yep those and a set of these https://www.amazon.com/Circuit-Perfo...gateway&sr=8-5

**haus9393** · 03-21-2019, 09:52 AM

If im using my existing tires do I need to order the wheels with a valve stem?

**DREWTICK** · 03-21-2019, 09:56 AM

I would probably go with something like this https://www.amazon.com/Circuit-Perfo...s%2C160&sr=8-3

**DREWTICK** · 03-21-2019, 10:01 AM

as for verifying the wheel size just check the tires, they should say 205/75/14 or 215/75/14

**haus9393** · 03-21-2019, 10:15 AM

Originally Posted by DREWTICK

as for verifying the wheel size just check the tires, they should say 205/75/14 or 215/75/14

yea they are 14s I just went and looked.

**Tom Edwards** · 03-21-2019, 01:57 PM

you have to measure across the bead seal area, not across the edge/outside dia.

**WacoWildcat** · 03-21-2019, 05:18 PM

One of the classic boats had velocity looking wheels that was black on the inside and machined look on the outside. Looked pretty good! Should have got a pic!

**jphillips2546** · 03-21-2019, 06:51 PM

FB_IMG_1553212238065.jpg

This one? I think Palmetto Boat Center has it now.

**WacoWildcat** · 03-21-2019, 07:17 PM

It was different than that but that looks pretty sharp! I believe it was the charcoal/blue boat they had. It looked good!

**Phoenix919** · 03-22-2019, 07:16 AM

These are the polar opposites from the ones the trailers currently ship with.
http://sendelwheel.com/wheels/t08mbml.html

**liv4bassin** · 03-23-2019, 04:13 PM

Originally Posted by DREWTICK

as for verifying the wheel size just check the tires, they should say 205/75/14 or 215/75/14

Saw this topic and had to go and check my tire size....225/75/15. 2013 619 single axle trailer which may explain the 15" wheels. ?

**ernie_diaz** · 10-02-2020, 02:14 PM

I know this is an older thread, but I need to replace my tires, so I figured I would upgrade the wheels at the same time. I was looking at a pair of 14x6, would those work? I believe factory is 14 x 5.5. Would I need a spacer or something?

**DREWTICK** · 10-02-2020, 02:33 PM

Originally Posted by ernie_diaz

I know this is an older thread, but I need to replace my tires, so I figured I would upgrade the wheels at the same time. I was looking at a pair of 14x6, would those work? I believe factory is 14 x 5.5. Would I need a spacer or something?

14x6 will work as long as the backset in centered and they are 5 on 4.5" bolt pattern, same as old Ford car wheels

Thread: Black wheels

Thread Tools

Search Thread

Display

Black wheels