-
2017 Pro XS
My 2017 Pro XS will not trim above the limit when out of the water it only trims as high as it will in the water running. That makes it very difficult to get my motor support on
Any ideas would be greatly appreciated. THANKS
-
-
Nitro Z19 it actually would be a tilt issue not a trim issue.
TNKS
-
See if the motor has a tilt limit switch installed.
-
Yes it does and I connected the orange calibration wires and got the motor to tilt up now I have another question is this band aid or a fix.
-
Mercury 3L/4 Stroke/Verado Moderator
Properly calibrating the "add-on" trim limit module would be a "fix". Likely it was not properly calibrated from the beginning.
If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info when posting. Thanks!