Results 1 to 7 of 7
  1. #1
    Member AussieJoe's Avatar
    Join Date
    Jul 2010
    Location
    Australia
    Posts
    220

    Reed Valvues 175 Optimax

    serial number:
    1B579453 2008 175 Optimax (non pro xs)

    Hi Guys,
    needing to replace my reeds, wondering what my options were in regards to aftermarket? Also should I be going for carbon fibre ?

    Joe
    Joe Allan
    Nitro Z7 Mercury Optimax 150hp Lowrance Ghost Simrad NSS Evo 3s
    Proudly Supported by: Gamakatsu/Majorcraft/Fuji/Kershaw/Samurai/Atomic

  2. Member
    Join Date
    Jun 2018
    Location
    Ottawa Ontario Canada K0B1C0
    Posts
    491
    #2
    I just did a little bit of research not too long ago for my 150 on reeds. my 2 top choices boiled down to....

    European Marine - TDR reeds

    Chris Carson Marine - CCM reeds


    both are frequently recommended by members on here through out the years.


    I wouldn't think twice now and hit up Don for the TDR reeds...
    2004 Ranger Reata 180vs 8" rapid jack magnum CCM reeds 21P tempest plus- 2005 150 optimax 1B044209

  3. Member
    Join Date
    May 2011
    Location
    Spangle, WA
    Posts
    6,181
    #3
    Replaced the SS reeds in my 150 Optimax 3yrs ago with TDRs from Don. Better idle, noticeably improved mid-range punch, worth the $$.
    _______

    Phil
    '09 Hewescraft ProV
    '09 150 Optimax


  4. Member
    Join Date
    Apr 2016
    Location
    Louisville, KY
    Posts
    258
    #4
    I just put some Chris Carson Reeds in my 150 EFI. Carbon fiber is the way to go. I don't know anything about TDR's but Chris Carsons are good, plus he answers the phone and tells you exactly what you need and how to do them.

  5. Member AussieJoe's Avatar
    Join Date
    Jul 2010
    Location
    Australia
    Posts
    220
    #5
    Thanks for the tip. Much appreciated.
    Joe Allan
    Nitro Z7 Mercury Optimax 150hp Lowrance Ghost Simrad NSS Evo 3s
    Proudly Supported by: Gamakatsu/Majorcraft/Fuji/Kershaw/Samurai/Atomic

  6. Member AussieJoe's Avatar
    Join Date
    Jul 2010
    Location
    Australia
    Posts
    220
    #6
    I ordered some a set from CCR plus relevant gaskets. Thanks for the responses guys.
    Joe Allan
    Nitro Z7 Mercury Optimax 150hp Lowrance Ghost Simrad NSS Evo 3s
    Proudly Supported by: Gamakatsu/Majorcraft/Fuji/Kershaw/Samurai/Atomic

  7. Member
    Join Date
    May 2011
    Location
    Spangle, WA
    Posts
    6,181
    #7
    For what it's worth, Don recommends and sells TDR, which are a carbon fiber replacement reed.
    _______

    Phil
    '09 Hewescraft ProV
    '09 150 Optimax