found an issue on my trailer. The tubing is broken coming from the tee going to the right side of the trailer brake. who made the 1999 mountain home trailers? I believe it has drum brakes. I am looking at all new kits, but the lines run inside the trailer tubing and its a hard line from the actuator to the tee. don't know if the rubber style is ok for that distance if I did a whole rework of the system....
thoughts or answers appreciated.
For that year most likely a Dri-dock tube trailer. They went of business.
I had stainless braided brake line made up at local radiator shop
I ordered a tubing kit. I'll get it going. nothing like a project
I swapped mine over to disc brakes when i replaced my lines. and brakes. Cost around $300 bearing and all.
Fishing Texas lakes one at a time
2000 Baltex hull 202 Elite Champion
2016 250 pro
8 inch Hydraulic Jack Plate
tempest 27 work by Steve
Hook sets are fishing reality.
Reply With Quote