-
AXIOM / NAVIONICS
Could someone tell me how to change the depth lines for navionics? Full Pool vs 5' low vs 20' low etc...
-
Honda / Raymarine Moderator
Try this from Navionics.
If you are currently in a Navionics+ subscription (or have previously purchased) Advanced Map Options for your Boating app, please check the setting for Water Level under Map Options. To reset the depth information to display as they would in our original chart database, you want to set your Water Level to 0 ft. This can also be done by resetting default values. Setting the water level to a positive direction will raise the water level, for times of a flood pool. Setting the water level to a negative direction will lower the water level, in cases of drought or when a lake is physically drained.
-
I believe that’s for the Navionics app. On the Axiom unit, you can’t do a depth adjust based on pool.