Pro Tec Gel coat restore and Iguana Graphics Decals

[rockdawg]

I recently purchased a 94 Ranger in good condition but needed a major cleaning. First a big thanks to Pro Tec for the gel coat restoration kit. It worked great. The boat looks amazing!
Also to Darryl at Iguana for the decals. Looks great and fast shipping!
Great to buy products that work as advertised and great customer service.
Thanks Guys!

Sorry but I can't get the pics to upload. They didn't do justice to the real thing anyway.

[cat19]

Thanks for using Pro-Tec!

[RIP343]

PRO-TEC is really a great product. I used the system on my 1990 365 and it made the finish look brand new. My nephew saw how well it turned out and ordered the system for his wake board boat. Seriously, why would anyone use anything else ? a great product and if you have any questions they respond quickly.

[crank68]

Every boat that leaves my shop has 2 coats of Pro Tec Sealant Polish.

[9nine9]

You use this sealant followed by wax?

[cat19]

No need to wax after the Sealant Polish. The Sealant Polish is the best protection you can use.

[9nine9]

BBCMEM isn't working for me

[cat19]

We are running 10.95 shipping g special. If you would rather have the discount call Ellen and she'll get it for you. 1 888 863 8896

[rockdawg]

I will tell you it was a lot of wet sanding on my boat, but after you apply the moisturizer and run that buffer for a few minutes, it's an amazing transformation. Mine shines like a new penny! Great stuff!

[twitch]

Pro-tec is great stuff keeps my old girl looking new ,time for a couple coats before I start this season and then it's good to go

[McQuaig]

I just bought 2 bottles of the Pro-Tec Sealant. I already had a bottle of 3-M Finesse-it so I'm going to use that with a buffer to hopefully remove the slight haze I have. Then 2 coats of Pro-Tec. Should the Pro-Tec be applied with a buffer? or is ok to do it by hand?

[92basshawk]

Not to hi-jack this thread but I see Pro-Tec is replying. I did the process last summer, which is amazing BTW, and now im ready to shine her back up. Scum line from the last 3 trips out. What should I use to clean the hull again without stripping the sealant?

[FlFedAngler]

Was thinking about wrapping my 06 Ranger. But now I think I will try Protech first. Will be a lot cheaper if it works.

[crank68]

Not to hi-jack this thread but I see Pro-Tec is replying. I did the process last summer, which is amazing BTW, and now im ready to shine her back up. Scum line from the last 3 trips out. What should I use to clean the hull again without stripping the sealant?

Wipe it down as soon as you’re off the water and you “should” not have to deal with a scum line. If you have one now...Dawn or most any cleaner will get it off and reapply and wax of your choice or of course Protec Sealant Polish.