I bought the boat this winter and wasn't able to put it on the water. Compression checks out, no hull issues, runs and idles well. It came with a beater 21p 4-blade that the prev owner agreed was not enough prop. I'll be moving a manual 6" jackplate over from my previous boat. I've been through all the owner's lists here on the site, 300 series boats are running 23-26p props on 150s, with 23 and 24 being the most common. I believe that the rev limiter on this motor kicks in at 6200 rpm, I probably want to be running 5600 or so at WOT? What's the best screw to get me there? Thanks!