Is there much speed to gain by raising the stock rev limiter and propping to 6300/6400 vs keeping the stock limiter with the Hydrotech flash? I have the flash with the stock limiter but was thinking about having it raised if there’s a big benefit.
Is there much speed to gain by raising the stock rev limiter and propping to 6300/6400 vs keeping the stock limiter with the Hydrotech flash? I have the flash with the stock limiter but was thinking about having it raised if there’s a big benefit.
I raised mine to 6500 and gained 5 mph..
Raise it and prop it for 6500. Totally eliminates the rpm lag. You don’t have to run there constant, but having that little extra umph up top is sweet.
I don't dare go over 6200rpm
I don’t dare go over 3500rpm!
You will never seal the rings at 3500
You'll get the most if you remove the limiter and spin the prop 65-6600.....most can flash the ecu raise the limiter and keep the same prop you were turning to the limiter before the flash and now turn the same prop 6500+......the extra rpms get it too its peek power band.
Hi performance parts or a Yamaha power head visit
Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
Paul Hottman Hydro-Tec's Pro staff since 1998
Maybe if your running a light hull? Most only gain 200-300 rpm running same prop from my experience.