I need some pics of guys Jackplates and how they are mounted on the boat, what hole the motor is in etc. Also would like to know the optimum prop to pad measurements for flashed 75hp motor. TIA!
I need some pics of guys Jackplates and how they are mounted on the boat, what hole the motor is in etc. Also would like to know the optimum prop to pad measurements for flashed 75hp motor. TIA!
Always Ready!
I was at BPS a couple weeks ago. They have a 195 TXW with backplates already mounted. You might check out your local BPS to see if they have a similar setup. Might answer some of your mounting questions
whatroads - A pun on the "information super highway"
Tracker 190 TX
90 hp Merc
Fortrex 80 w/ 52" shaft
This would vary from one boat to another. Post what type of boat you have and someone who is familiar with it will chime in.
175 TXW
Always Ready!