I have a 2012 200xs and want to start it in my driveway. I have the muffs in place turned on the water and water comes out of 4 small holes at the front of the lower unit. Do i need to plug those holes up before i start the motor?
Thanks
I have a 2012 200xs and want to start it in my driveway. I have the muffs in place turned on the water and water comes out of 4 small holes at the front of the lower unit. Do i need to plug those holes up before i start the motor?
Thanks
2012 Ranger Z518
Motor Info:
200 XS
Serial number 1B882317
Model number 1200P73EY
Yes sir. If you do not have the Merc plug you can use duct tape. Also, do not rev over 1200 in neutral. It will cause a code.
thanks so much.
2012 Ranger Z518
Motor Info:
200 XS
Serial number 1B882317
Model number 1200P73EY
they make a bra to cover the low water pick up, but duck tape works
duck tape did the job. Have not run the motor in 2 months and wanted to make sure it started before i went out and it started right up.
Thanks for the help.
2012 Ranger Z518
Motor Info:
200 XS
Serial number 1B882317
Model number 1200P73EY
For an optimax never go over 1300 RPM on the earmuffs. Never heard of having to plugging any other holes.
If you have the pick ups in the nose you need to close em off...
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com