Does anyone have any pictures of how they ran the transducer cables from a totalscan up the shaft of the Ultrex and into the boat. Curious how to do this without getting a lot of twist when the shaft of the motor turns. Thanks
Does anyone have any pictures of how they ran the transducer cables from a totalscan up the shaft of the Ultrex and into the boat. Curious how to do this without getting a lot of twist when the shaft of the motor turns. Thanks
Phoenix 2021 721 ProXP
250 V8 ProXS
Few threads on here with some different methods shown.
Depending on the size of your cable it is possible to run the cable in the slot and even through the steering box.
I prefer to not run the Transducer cable down the foot pedal cable sleeve to avoid picking up interference from the TM power wires inside the sleeve. I also use the Cobra ties to get some separation between the wire and the TM shaft where it is secured to the shaft.
I try to drive as if my 16 year old Grandson is following me
Speak as if he is listening and act as if he is watching