***NOTE***
This is for the 24/36 volt Terrova Bluetooth i-Pilot upgrade. If you got a 12 volt then you will order the 12 volt circuit board (2774067). There is a kit (2774057 Head/remote/heading sensor only) if you want but still have to buy the board and everything listed in the parts section. Shop around for the board, remote, heading sensor on ebay and save you a lot of money. When checking out at Minn Kota make sure to change shipping method to save on shipping. Pretty straight forward install if you're handy with a phillip screw driver, all plug and play. Hardest part was removing the screw for the board but find the right screw head and you won't strip it.
Here is all the parts needed to do a complete upgrade:
Board:
CTRL BD,24/36V IP TRV BT 2774069
Head:
i-PILOT CONTROLLER 1.6 TRV,UTX I PILOT 1.6 SERVICE 2774062
Remote:
i-PILOT REMOTE-BLUETOOTH 1866550
Heading Sensor:
BLUETOOTH HEADING SENSOR 1866680 (If you want jog feature)
Parts:
CONTROL BOX 2292500
HOUSING-CENTER 2326530
DECAL 2325652
LOCKING TAB 2320830
SCREW-#4-24 X 3/8 2383428 (order 2)
STRAIN RELIEF, HEYCO P/N 1852 2322901 <-(Easy to remove old one but just in case only $.19)