Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,614

    Hydrualic hose and caps

    I am in the process of moving batteries around and cleaning up some wiring. I am also going to be rerouting my hydraulic hoses. Is there a fitting that I can screw on the end of the hose to keep the fluid in and most of the air out? I have the seastar tournament series that I bought from allison.

  2. Member
    Join Date
    Dec 2014
    Location
    United States
    Posts
    107
    #2
    Following this post.

  3. Moderator
    Join Date
    Dec 2004
    Location
    Chester,Va
    Posts
    3,664
    #3
    There are no caps that I'm aware of.
    I would definitely bleed the system after rerouting the hoses.

  4. Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,614
    #4
    I'm just wanting to cap each hose off while I pull them back into the boat to be repositioned. Does anyone the thread size of the hose end's?

  5. Member MET's Avatar
    Join Date
    Apr 2006
    Location
    Atlanta, GA
    Posts
    439
    #5
    Quote Originally Posted by big_o_tom View Post
    I'm just wanting to cap each hose off while I pull them back into the boat to be repositioned. Does anyone the thread size of the hose end's?
    They are 3/8th.

    You can find brass, 3/8 male to male compression fittings and end caps. Been there.
    MET/ XB-21 BasSport Pro Elite - 300xs