PNG image 7.png08 175!
Guys,Am I going in the right direction here?
Just mocked up not drilled yet.
Love to use existing holes for SI/DI
Does the 12” rule apply when the two are not side by side?
TI2 w/ycable.
PNG image 7.png08 175!
Guys,Am I going in the right direction here?
Just mocked up not drilled yet.
Love to use existing holes for SI/DI
Does the 12” rule apply when the two are not side by side?
TI2 w/ycable.
That’s how my to are mounted. With the exception, that my carbon unit transducer is up higher so it will not get struck by any thing while on pad.F99AB8E9-F269-403C-92A7-06AC5CFA5E64.jpeg
Last edited by gatorglenn; 02-23-2019 at 05:01 AM.
Have an adventure everyday !
2006 PT 175 TX 60 HP.
If you don't have a jackplate, attach it under the transom step=less blockage from the outboard for Side Scan.
How I do Humminbird MEGA SI transducers here in post #10:
http://www.bbcboards.net/showthread.php?t=418320
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I agree with Wayne, flush under the step is also how I did my SS3D.
one of the pics in post #16
http://www.bbcboards.net/showthread.php?t=920813&p=9549474&viewfull=1#post9 549474
2011 Tracker PT 175 TF
2011 Merc 60 ELPT 4S
Thanks guys,nearing the finish line with all the upgrades I’ve started!