*Update. Received the FX trim which is aluminum vs. the plastic trim that comes on the ZX250. After install is done finished product looks great, everything fits. To remove the old plastic trim and install the new aluminum trim the trolling motor power will need to be disconnected and assuming TM is an Ultrex or Fortrex with US2 connector that will need to be unplugged. This requires removing the front electronics to get to the wiring underneath them. Make sure all power is off at the main cut off switch and the circuit breaker for the TM is tripped before starting work. At first glance the new aluminum trim looks wider than the plastic trim, which it is. However the screw holes on both trim pieces line up perfectly and upon tightening the screws the aluminum trim pushed the pad and carpet outward and fits into place. Looks great and the tool holder makes it more functional. Cost shipped from my dealer was $120.
FX Aluminum Trim - Skeeter Part #91132461