Can the US2 sonar unit be replaced. Mine not working, my fault about jumping battery, enough said, thanks
Can the US2 sonar unit be replaced. Mine not working, my fault about jumping battery, enough said, thanks
That would be a yes. the whole housing end with the puck in will have to be changed.I have only changed one in Seven Years. I recommend you try your unit on a known working puck before you change it out, if you have not done so already. Make sure you order the correct one. 80, 101 are the same. 112 is larger. Go to Minn Kota web site and type in the serial number and it will take you to your motor.
Last edited by Bradrodfish; 02-19-2019 at 07:24 AM.
Not working at all or just noisy?
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Not working at all, burnet wire's , too much voltage. Read something on here that would happen. Installed a pluck, would like to remove it.
The transducer can be changed. We carry the US2 in stock.
John
BBC Sponsor since 2006: (870) 773-3474
Mon - Thrs 8am - 5pm Central
Friday 8am-12pm
Garmin Certified Dealer and Installers: Call us for all your Garmin Electronics needs!
ASC for: Garmin, Lowrance, Minnkota, Humminbird, and Powerpole.
[SIGPIC] http://www.jonestrollingmotor.com
[/SIGPIC]