Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    May 2010
    Location
    Orlando, Florida
    Posts
    47

    2004 Honda 130 Engine Oil Drain Bolt

    I have a 2004 Honda 130 and the engine oil drain bolt does not want to stay tight. I tightened the bolt when I changed the engine oil, took the boat out twice and I noticed that there was a little oil oozing from around the bolt. I tightened the bolt again and two trips later the same thing happened. I haven't had this problem before, can someone shed any light as to what may be wrong or what I can do to fix the problem?

  2. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,928
    #2
    Have you replaced the washer/gasket under the drain plug?
    I would try that, if it doesn’t work, than maybe some blue lock tight!!