Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2008
    Location
    Dunlap, Tennessee 37327
    Posts
    173

    93sv trolling motor mount

    mine is getting interferance when i hit the power button on the foot control, anyone else have this issue or have a cure?
    Daniel Willoughby

  2. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,096
    #2
    How and where are your wires at going to the TM and under the deck in relation to the TM plug/wires???

    I have very little but not enough to make me crazy.....
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  3. Member
    Join Date
    Mar 2008
    Location
    Dunlap, Tennessee 37327
    Posts
    173
    #3
    They come right behind the female trolling motor plug, power wire just left coming off accessory switch, thinking about running separate wires and grounding the motorguide fin with ground wire.
    Daniel Willoughby

  4. Member
    Join Date
    Jul 2014
    Location
    Sylacauga, Alabama
    Posts
    124
    #4
    Keep us updated if you find a solution. I am having the same issue. Thanks

  5. Member Hez's Avatar
    Join Date
    May 2017
    Location
    Apopka, FL
    Posts
    2,886
    #5
    Just got mine installed...am also having some interference. I plan on running a ground wire to the foot of the TM itself.




    Wishin' I was fishin'...


    1990 Ranger 374v
    1996 175 HP Mariner - Magnum EFI
    25p Tempest - A45 model
    80 lb 24v MinnKota Maxxum
    Humminbird Helix 10
    Humminbird Helix 7
    Garmin EchoMap 106sv w/ LS
    Dual 8' Power Poles