Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2013
    Location
    Bowling Green, KY
    Posts
    717

    Power pole leaking

    Anyone ever had a leak right at the push fitting, blue hose on the power pole itself? I contacted power pole company and they sent me a new hose, but I'm not sure that's the problem. Seems like the brass fitting is leaking where it connects to the other brass fitting vs a cracked hose or something.

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,920
    #2
    Remove the ferrule and the nut , recut the hose with a good square cut , and reinstall making sure you really snug down the fitting should solve your issue. Worst case you may need a new ferrule and nut, however highly doubt it. Most leaks are from not tightening it down enough or not getting the tubing cut nice, clean and square.