Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2017
    Location
    Marion, Ky
    Posts
    45

    Ti2 installation question

    Looking at upgrading my electronics to 7" and 9" Elite Ti2s. Aside from the units themselves what else to I need to get for the install?

  2.  
  3. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,776
    #2
    Transducer(s), correct size and length wires, some bolts and nuts. (Oh, and the installation manual. It is dull, but I strongly recommend reading it.)

  4. Member
    Join Date
    Jul 2018
    Location
    UTAH
    Posts
    13
    #3
    A transducer troller mount. Possibly two Ram/custom mounts for each unit depending boat configuration; heat shrink, zip ties, wire shield, a good supply of parts to join/spice wires, wire crimps, and a DC voltmeter is always handy. Basically another $100-$300 depending on the mount choice.....