I’m thinking of putting a 12” plate on my 21xdc with 2” spacers? To save money.... good idea or spend the extra and just buy a 14?
I’m thinking of putting a 12” plate on my 21xdc with 2” spacers? To save money.... good idea or spend the extra and just buy a 14?
Shouldn't be a problem... Go for it... Dan
Surely a 14 is cheaper than a 12 with spacers? Id go with 14 if you want a 14. Way too much unnecessary hardware with spacers
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
I found a new in the box 12 for $175. Spacers are $100.... new 14” is over $500
I believe id still get the 14 unless money is too tight
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
Do you have a rapid jack? If so, you can call Steve at Hydrodynamics and he will make you the back plates to make it 14".
Steve who is I talked to about buying a 14
Money isn’t tight... but if I can save 50% and get the same outcome? Why not. If there is a difference I do want to go the best route
One solid piece?
More bolts to break and not look like an afterthought is the only issues
xpress x19, 200ho G2, aluminum sawtooth cut prop, paper sack tackle storage, ugly stik pro team, color c-lector
No extra bolts, just longer bolts for the spacer.Originally Posted by alli ss
With that being said, I'm running a 12" plate with a 2" spacer because it weighs less then just a 14" plate.
A 2" spacer isn't much, you don't even really notice it.
Last edited by hyperflow; 02-02-2019 at 08:14 PM.
Reply With Quote