2019 21 trx hull

[bd_skeeter]

Are the hills on 19’s different? I hear they are faster what about ride and handling if coming from a Phoenix

[bd_skeeter]

So is there no one who really knows the answer, about 21 trx hulls being changed on 2019’s

[Landar]

Same as2018. Probably just laid up better. The 21 TrX hulls were fast in 2014 and 15. Then they changed the layup to strengthen the front of the boat and slowed them down. Hopefully they are building them like the early ones again. It’s a hp Hull.

[stein3411]

Same as2018. Probably just laid up better. The 21 TrX hulls were fast in 2014 and 15. Then they changed the layup to strengthen the front of the boat and slowed them down. Hopefully they are building them like the early ones again. It’s a hp Hull.

I agree, my 2014 was quicker and 3 mph faster than my replacement 2017. I can get 76 mph out of my 2017 with just the driver and no water in the livewells. Flood the wells and add a partner and the top end drops off worse than my 2014 did. I'm also interested to hear some legitimate numbers from the 2019 w/ Mercury 250 Pro XS 4S. As for everything else on my 2017, I couldn't ask for a better built boat. Great platform to fish from.

[gambler4]

I think There are other differences . My 17 isn't any heavier than my 06 hp but is 5 mph slower. And rides better without the chine walk .to have that speed loss would have been adding 500 lbs to the hp hull. I think the trx has some hook in the hull to calm the walk.also the wing master lowers didn't help speed,

[jjtriton]

the new 21TRX coming from the new plant in Midway are running really good with the new 250 4/S. Most are running in the mid 70's loaded. Hole shot and midrange are awesome. It almost like that engine was made for Triton Boats.

[05ranger]

My 2019 21trx with the new v8 4-stoke is 73mph all day!!! Fravorite right so far!!!

[stein3411]

the new 21TRX coming from the new plant in Midway are running really good with the new 250 4/S. Most are running in the mid 70's loaded. Hole shot and midrange are awesome. It almost like that engine was made for Triton Boats.

I would still like like to hear real numbers, rpm's, prop, p2p, etc. from someone that has this setup and is past the motor break in hours.

[05ranger]

I would still like like to hear real numbers, rpm's, prop, p2p, etc. from someone that has this setup and is past the motor break in hours.

2019 21trx ultrex, 2-8ft pp’s , 4- Duracell’s group 31 bat , HDS 16 on the front and a HDs-12 in the dash with a HDs-16 on a ram, very heavy loaded tackle wise!
2019 Mercury 250 V8 4 stoke with 104hrs
25p fury smartcraft 5950-5970@73 two people and a Full tank of gas! Get to 70 pretty quick takes a little more time to 73mph,
P2P haven’t measured it

[gambler4]

2019 21trx ultrex, 2-8ft pp’s , 4- Duracell’s group 31 bat , HDS 16 on the front and a HDs-12 in the dash with a HDs-16 on a ram, very heavy loaded tackle wise!
2019 Mercury 250 V8 4 stoke with 104hrs
25p fury smartcraft 5950-5970@73 two people and a Full tank of gas! Get to 70 pretty quick takes a little more time to 73mph,
P2P haven’t measured it

thats slow , my17 will run 74 in the heat of summer and 75-76 in the cold ,I was hoping they had got back to the upper 70's

[bassmaster,RN]

5900+ rpms with a 25 fury is ridiculous with that load. You def have something figured out.

[stein3411]

2019 21trx ultrex, 2-8ft pp’s , 4- Duracell’s group 31 bat , HDS 16 on the front and a HDs-12 in the dash with a HDs-16 on a ram, very heavy loaded tackle wise!
2019 Mercury 250 V8 4 stoke with 104hrs
25p fury smartcraft 5950-5970@73 two people and a Full tank of gas! Get to 70 pretty quick takes a little more time to 73mph,
P2P haven’t measured it

Thank you. That's pretty good RPM's for that load and a 25P Fury. Would like to know your P2P and what size jackplate you have (assuming 10").

[05ranger]

Thank you. That's pretty good RPM's for that load and a 25P Fury. Would like to know your P2P and what size jackplate you have (assuming 10").

Yes 10” plate I was wrong on Rpm it’s 5750 not 5950 I ran it today. Sorry about the rpm being wrong.

[stein3411]

Yes 10” plate I was wrong on Rpm it’s 5750 not 5950 I ran it today. Sorry about the rpm being wrong.

I think you're going to want to give the 24P Fury a spin. Need to get the RPM's up for that motor.

[05ranger]

I think you're going to want to give the 24P Fury a spin. Need to get the RPM's up for that motor.

ive tried a 23,24 fury and 25,26 and 27 tempest. They are All slower. Moter quits pulling after 5700 on any prop

[05ranger]

I don’t buy the motor needs higher rpm crap.

[stein3411]

ive tried a 23,24 fury and 25,26 and 27 tempest. They are All slower. Moter quits pulling after 5700 on any prop

That's interesting and surprising.

[bassmasterffej]

Do you have a hydraulic jack plate? Maybe you are too deep?

[Landar]

He's fine. It's running about right.

[05ranger]

Do you have a hydraulic jack plate? Maybe you are too deep?

Manuel plate!!!