SeaDek Install...Need help with carpet removal..

[John Hagins]

Did you get it cut to size from Seadek, or is it bulk piece?

John

[Pokesgrad]

Very easy product to install. Just order the stencil kit and take your time. I even had them send me a dry fit kit and made any corrections. Installed it on my nautique. Took me a half hour to install after I cleaned the surface with acetone. Watch their install videos and you can’t go wrong. If you want to see an example I believe this is what Oliver Nyg has on his deck. I have read on the nautique forums where owners have spilled motor oil on it and it cleaned up easily with dawn soap.

I am a little curious to see how it holds up long term on a bass boat.

[Mike A]

Did you get it cut to size from Seadek, or is it bulk piece?

John

And can you divulge the approximate price for the piece you got?

[Las10488]

Are the lifs gel coated? That was a concern of mine when I considered it. You will see the edge of each lid and if it isn’t gel coated will look bad.

[RBZ7]

And can you divulge the approximate price for the piece you got?

little north of $300 for that one piece. I think the ranger logo added about $60

[RBZ7]

Are the lifs gel coated? That was a concern of mine when I considered it. You will see the edge of each lid and if it isn’t gel coated will look bad.

only replacing the floor under the console.

[nojretlas]

Please share pics when you are finished....I am intrigued by this!

[Las10488]

Can’t wait to see pics, did you do one large piece?

[RBZ7]

Did you get it cut to size from Seadek, or is it bulk piece?

John

i found my dry fit this morning in the office. I started out with something similar to this that I traced out myself. I mailed that to SeaDek & they sent this dry fit back. Once you check to make sure of proper fit, you email them confirmation & they’ll cut and ship it. I will post some pictures when everything is finished up. They take two layers and make one to get the background for the edging & custom logos.

[Mike A]

little north of $300 for that one piece. I think the ranger logo added about $60

Thank you sir. Eager to see your finished product. I believe they'll be hearing from me as well.

[carolinagreenhead]

Following along. Looking forward to seeing the finish.

[RBZ7]

Quick update. I spent most of my Saturday afternoon scrubbing glue! Thank goodness that's over with!! Hopefully will have time this week to finish the prep work & install.

[carolinagreenhead]

What are you using to get the glue off?

[RBZ7]

What are you using to get the glue off?

Goo Gone Pro-Power Spray Gel. Worked great!

https://googone.com/pro-power-spray-gel

[Groma]

Easyoff extra strength oven cleaner works for removing old glue and is not as dangerous as those chemicals are. Spray it on heavy and let it soak for thirty minutes,then scrape.

works on older glue especially .

[carolinagreenhead]

Any finishing updates or pics?

[RBZ7]

Any finishing updates or pics?

Not yet. Hopefully will have time to finish this weekend.

[RBZ7]

Finally had time to finish up this past weekend. I’m really happy with the way it turned out! Spent close to 4 hours on removing the old carpet & prepping the surface. Spent about 4 minutes installing the SeaDek! If you can put on a sticker, you can install this stuff. Very easy. I did remove the seats & hot foot to make sure nothing restricted my access. If I did it again, I would also remove my coin box.

[dean c]

Looks great I really wish Ranger would supply a template or something for the different models to seadek.

[nojretlas]

Finally had time to finish up this past weekend. I’m really happy with the way it turned out! Spent close to 4 hours on removing the old carpet & prepping the surface. Spent about 4 minutes installing the SeaDek! If you can put on a sticker, you can install this stuff. Very easy. I did remove the seats & hot foot to make sure nothing restricted my access. If I did it again, I would also remove my coin box.

Looks awesome!