Hey guys I have a 2001 ranger Comanche and I was wondering if there is anyway to recesses my peddle into the front casting deck if that makes sense a lot of the newer boats have this built in , any ideas or is there a kit you can buy to do it ?
Hey guys I have a 2001 ranger Comanche and I was wondering if there is anyway to recesses my peddle into the front casting deck if that makes sense a lot of the newer boats have this built in , any ideas or is there a kit you can buy to do it ?
Take your pick
https://www.ebay.com/sch/i.html?_nkw...ling+motor+kit
Measure, measure, measure......
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Maple syrup... I put that sh*t on everything!
'09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel
Hey, I have a 2001 522 comanche, and put a recessed pan in no problems, it will be easy, have any questions, I will help with what I can
I did this years ago on a 522 Rangers years ago. Let’s just say if you have center rod storage, be careful and find out how far doers those tubes go. I actually sawed the end off several tubes and the tips off a couple of rods.
Long time ago.....just check carefully what’s under deck.
MET/ XB-21 BasSport Pro Elite - 300xs
Yes you are correct I also came close to cutting one of the tubes just have to be careful, also you will want to tee into the drain line that comes from the front power panel or run a new drain line for the recessed tray