Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Aug 2018
    Location
    Ontario
    Posts
    1

    Trolling motor peddle

    Hey guys I have a 2001 ranger Comanche and I was wondering if there is anyway to recesses my peddle into the front casting deck if that makes sense a lot of the newer boats have this built in , any ideas or is there a kit you can buy to do it ?

  2. Member Coke's Avatar
    Join Date
    Nov 2010
    Location
    Roanoke
    Posts
    2,175
    #2

  3. Member crank68's Avatar
    Join Date
    Mar 2011
    Location
    Kenly, NC
    Posts
    17,416
    #3
    Measure, measure, measure......
    BULLET 20 XRD/250 Merc Sport XS
    www.ncboatguy.com

  4. Tin Boats Moderator Pokie Pa's Avatar
    Join Date
    Jan 2008
    Location
    Lake Ariel, Pa.
    Posts
    7,272
    #4





  5. Losing fish by the pound. CDN Bass's Avatar
    Join Date
    Nov 2017
    Location
    Waupoos, ON
    Posts
    3,061
    #5
    Quote Originally Posted by Bieger View Post
    Hey guys I have a 2001 ranger Comanche and I was wondering if there is anyway to recesses my peddle into the front casting deck if that makes sense a lot of the newer boats have this built in , any ideas or is there a kit you can buy to do it ?

    First phishing post, I see.
    Maple syrup... I put that sh*t on everything!
    '09 Stratos 201 XL EVO DC | 250 Pro XS | Razor 4 25P | 6" JP | 10' Talons Gen 2 | 112# Ultrex | Lowrance C12 x 4 | AT | '16 RAM Rebel

  6. Member
    Join Date
    Dec 2013
    Location
    Grovetown Georgia
    Posts
    256
    #6
    Hey, I have a 2001 522 comanche, and put a recessed pan in no problems, it will be easy, have any questions, I will help with what I can

  7. Member MET's Avatar
    Join Date
    Apr 2006
    Location
    Atlanta, GA
    Posts
    439
    #7
    I did this years ago on a 522 Rangers years ago. Let’s just say if you have center rod storage, be careful and find out how far doers those tubes go. I actually sawed the end off several tubes and the tips off a couple of rods.

    Long time ago.....just check carefully what’s under deck.
    MET/ XB-21 BasSport Pro Elite - 300xs

  8. Member
    Join Date
    Dec 2013
    Location
    Grovetown Georgia
    Posts
    256
    #8
    Yes you are correct I also came close to cutting one of the tubes just have to be careful, also you will want to tee into the drain line that comes from the front power panel or run a new drain line for the recessed tray