What is out there for where the hydraulic lines penetrate the boat?
What is out there for where the hydraulic lines penetrate the boat?
the new hydrualic lines on the 2.0 models come with a preinstalled grommet on the line for a clean install.
http://www.bbcboards.net/showthread.php?t=890529
I guess I should have stated. I just got a used set of blades, they was produced 10-16. They still have the old style lines.
T H Marine Bulk Head strain relief, part number: BSR1KDP. you can find these cheap at zoro tools online in the size you need
Thanks for the reply.
I was hoping to find one for all 4 lines and the wire for the light. I really don't want to drill 5 holes.
Thanks for the reply.
I was hoping to find one for all 4 lines and the wire for the light. I really don't want to drill 5 holes.
contact ranger boats they make a nice bulkhead for it but it would be 2 and 2 no one makes one plate for 4 lines and a light wire. and if they did you would be sill drilling 4 holes if not cutting out a big square. If you have the 5/16" old style tubing not really a big deal drilling 4 seperate holes honestly. Be glad you didnt go with 2.0 poles you would be drilling (4) 3/4 holes with a holesaw.
Most electric supply stores have a variety of rubber grommets on hand. Or a good automotive supply store.