Not sure where to ask this so I thought I would start here. Not a big deal but... the tips of the “E-TEC” decal on one of my G2 side panels are beginning to curl up. Is there a good way to fix this before it gets worse?
Not sure where to ask this so I thought I would start here. Not a big deal but... the tips of the “E-TEC” decal on one of my G2 side panels are beginning to curl up. Is there a good way to fix this before it gets worse?
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419
You can carefully cut just past where they’re starting to curl with a Razorblade to stop them from continuing to curl, or peel them and put on new stickers. With a heat gun it isn’t terribly hard. I got my sticker set off EBay but yours aren’t bad. A little cut here and there and it should be good.
2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV
I guess that’s about the only options. Appreciate the help.
Too much boat saver, I reckon. That and too much fishing
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419
AZ sun doesn't help matters same down here in FL. The ETEC decals aren't too terrible pricey though less that $15.00
I gotta quit rubbing on it. But I love it and I can't stop.
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419
probably going so fast you are blowing the decals off the thing.
2020 Ranger Z519 | 2020 Mercury Pro XS 225 4S | Helix 10SI | Helix 10 MDI G3N | Helix 10 MDI G3N | Noco GENIUS 10X4
Fury 3 22P True Pitched | Power Pole Pro 2's | Ghost TM | Mega 360 | MEGA LIVE | Atlas 8in Jack Plate | Trick Step | 3X Amped 80ah Lithiums
I keep it under 80!
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419