-
Replacing tip
How is the best way to cut a pole off that has broken tip? just to get it straight.
-
I've had good results using a fine cut-off disc on a Dremel tool. Go slow and easy so the rod blank doesn't splinter.
Tom
-
^^^^^^^^^^^^^ i would do this and wrap the area to be cut with painters tape
-
If the tip metal part is broken, you don't want to cut the rod. Heat just the eye or end of the metal part with a lighter and pull it off with plyers. Keep all heat away from the rod because if you put flame on the rod it will ruin it.
You can get a kit to replace the tip almost anywhere.
-
I have cut rods with painters tape and a very good hacksaw, dremel works too fast for me. But billnorman1 has a point, if it is just the tip metal a little heat, pliers, a new tip, appropriate adhesive, and bam, done.
-
Have never cut from the tip,