Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Raleigh, NC
    Posts
    1,428

    2003 193 transducer placement

    Where do you put your thru hull transducer? Looks like i have to move pumps out of the way as the gas tank covers most everything else.

  2. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,832
    #2
    If you have the horseshoe shaped tank, the oil res, batteries and charger have to come out. There is a cover under them. If you have a rectangular tank in the center of the compartment, it has to come out. I've never seen a 2003 193, so can't really tell you for sure.

  3. Member
    Join Date
    Jun 2004
    Location
    Raleigh, NC
    Posts
    1,428
    #3
    My batteries are in the side compartments in the back. There is a wooden board with the battery charger on it resting on the horseshoe shaped tank. I don't see any plate. So I guess I need to take the whole tank out then? Doesn't look too bad to do

  4. Born on th Llano Estacado Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    20,832
    #4
    Post a picture. That'll make it easier to tell.

  5. Member
    Join Date
    Jun 2004
    Location
    Raleigh, NC
    Posts
    1,428
    #5
    Got it figured out. Thx!

  6. Member
    Join Date
    Jun 2004
    Location
    Raleigh, NC
    Posts
    1,428
    #6
    What about a Total scan transducer? Will it work on the underside of the back step?

  7. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,840
    #7
    Quote Originally Posted by techman View Post
    Got it figured out. Thx!
    Tell us about what you found, so other owners, who might not know, will get much needed info! Thanks!!!

  8. Member
    Join Date
    Jun 2004
    Location
    Raleigh, NC
    Posts
    1,428
    #8
    For the thru hull I was able to move pump hoses without taking things apart. Put the transducer right near the bilge pump. Still trying to figure out where to put the total scan transducer