Serial # 0G938597
had a bogging issue and could visibly see stator was bad upon inspection. Bought CDI stator and 2 ignition Packs (and new trigger since the flywheel was going to be off). Took it to merc mechanic when I figured out I needed tool to pull the flywheel and he replaced the parts for me. Motor ran great. However
first time out the alarm would start going off at 4K rpm or above with the intermittent beep. Oil reservoir was very low so I added a gallon of oil, topped of reservoir in motor just in case and alarm still sounds when I hit 4K rpm.
I loosened cap on reservoir to confirm oil is flowing from oil tank in boat to reservoir in motor.
i noticed voltage gauge was showing 11 at idle and would hit 13 once up on plane. Given it just started after replacing these parts, should I be considering a voltage issue? Anything else to check? Mechanic is on vacation and I would like to get back on the water