Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jan 2014
    Location
    Center, Tx
    Posts
    139

    2006 Yamaha Hpdi help

    Ok I’m stumped. 2006 250 hpdi wont run wot. It has a slight miss at the top of the rpm range and won’t go past 5500 rpm. I have changed all mystery filters, canister filter in the motor, low pressure fuel pumps, changed filter and vest pump. Hooked up manual gauge on vst pump the motor idles at 50 psi and drops to 30 psi at wot. Ran with computer hooked up and high pressure is normal 980 psi I believe. Ran auxiliary fuel tank, still no change. Changed stator also. I forgot to mention that it has a reman power head with 10 hrs on it. Any help would be greatly appreciated. Thanks
    i have also had injectors sent off and tested.
    Last edited by Brad Jones; 01-08-2019 at 08:02 PM.

  2. Randy Walker
    Join Date
    Aug 2006
    Location
    Roseville
    Posts
    130
    #2
    following...

  3. Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,065
    #3
    Make sure the throttle plates are opening fully. Also if the problem started after power head replacement it may need a sync and Link performed.

  4. Member
    Join Date
    Jan 2014
    Location
    Center, Tx
    Posts
    139
    #4
    Checked that already. Thanks

  5. Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,065
    #5
    Try hooking an external fuel supply to it and test run. That 30psi at WOT is low.

  6. Member
    Join Date
    Aug 2017
    Location
    Kiln, mississippi
    Posts
    6
    #6
    Check computer

  7. Member
    Join Date
    Jan 2014
    Location
    Center, Tx
    Posts
    139
    #7
    Already ran with auxiliary fuel tank.

  8. Member
    Join Date
    Jan 2014
    Location
    Center, Tx
    Posts
    139
    #8
    Please delete. Bought pro xs