Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Dec 2009
    Location
    Phoenix
    Posts
    202

    Ultrex foot pedal location

    I just purchased a 2018 921. Came with a fortrex, so I ordered an Ultrex. Just started doing the swap today. Plenty of room in the pedal tray for the Ultrex foot pedal, but it seems the pedal is likely to cover the drain hole. The previous Fortrex had a batter tender disconnect mounted inside the tray on the side, which kind of limits me how far forward I can locate the pedal. Maybe I just have to remove the pedal once a year to clean out any soft plastics.

    This being the fourth time I have installed an Ultrex, I will remember to rotate the pedal before I screw it down so I can get the cord to lay where I want.

  2. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,010
    #2
    On my 619 I had to push the pedal all the way back to make it work due to the stiffness of the cables. It covers the hole but doesnt block it.....
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS