Does anyone know where we can purchase the pump top suck oil out thru dipstick? I have the wrench, just looking for the pump..thanks
Does anyone know where we can purchase the pump top suck oil out thru dipstick? I have the wrench, just looking for the pump..thanks
Jason Davis, MSgt, USAF, Retired
IF YOUR NOT GETTING HUNG UP, YOUR NOT FISHING WHERE THE FISH ARE!!"
2019 Falcon 195
2019 Yamaha SHO 200 w 23P Fury
Helix 9 DI (Bow)
Helix 9 SI with Mega (Console)
MK Ultrex 80lb
NMEA 2k
I ordered one off of Amazon that worked just fine. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Jason Davis, MSgt, USAF, Retired
IF YOUR NOT GETTING HUNG UP, YOUR NOT FISHING WHERE THE FISH ARE!!"
2019 Falcon 195
2019 Yamaha SHO 200 w 23P Fury
Helix 9 DI (Bow)
Helix 9 SI with Mega (Console)
MK Ultrex 80lb
NMEA 2k
Jason Davis, MSgt, USAF, Retired
IF YOUR NOT GETTING HUNG UP, YOUR NOT FISHING WHERE THE FISH ARE!!"
2019 Falcon 195
2019 Yamaha SHO 200 w 23P Fury
Helix 9 DI (Bow)
Helix 9 SI with Mega (Console)
MK Ultrex 80lb
NMEA 2k
This is the product description:
Product description
ALEKO bst1017n 12v 5a dc motor fuel oil diesel extractor scavenge suction transfer pump w/ hose is good quality oil / fluid / diesel transfer pump extractor. Comes with a handle and an on/off switch. A great way to extract oil or fluid from your vehicle without mess & specialized tools extract the oil from your car, motorcycle, scooter, quad bike, truck, boat, forklift, generator, tractor, ride on mower etc. siphon & transfer diesel to cars, trucks, ships, boats, tractors, farm machinery, plant equipment etc. Terrific value and fast shipping.
You can always drain it.
SIM Yamaha has the Mity Vac extractor and additional adapter needed for the SHO. When i purchased it it was just a section of black rubber hose that fits over the mity vac tubing and fits on the dipstick tube.
Pump
https://www.simyamaha.com/Mityvac_p/mv-07400.html
Adapter for SHO
https://www.simyamaha.com/Yamaha_Mit...madtkitsho.htm
No electricity so is relatively safe to pump oil with fuel mixed in. Use at your own caution but I have pumps a good amount of fuel oil mix with no problems.
Is the mighty vac from sim Yamaha one that you pump by hand or can you hook to an air compressor?
X
Why not just drain it? Just did an oil change this week and it was pretty quick and easy.
2013 ZX200
Yamaha 200 SHO
Hand pump. Takes about 15 seconds to build the vacuum, then just let it draw the oil out.
No need for Tim the Tool Man Taylor 400hp quad drain dual pump express.
This is the one I use on my 250 SHO. I've used it two or three times now and it works well.
EWK 7.5 Liter Manual Oil Pump... https://www.amazon.com/dp/B075CWYZMX...p_mob_ap_share
I use this one from Harbor Freight. Use it on all of my vehicles.
https://m.harborfreight.com/6-1-4-qu...not%20provided
2016 Ranger RT188, Yamaha 115 sho, dual console, 80# Ultrex, hotfoot, networked HB Solix 10 & Helix 9, Mega 360. Powertech NRS3 18p, Atlas 4" jack plate.
This is what I use.
https://www.northerntool.com/shop/to..._465467_465467
This works great for me. Don't need anything fancy. $17
https://www.ebay.com/itm/Excellent-12V-Fluid-Oil-Diesel-Extractor-Tubes-Truck-RV-Boat-ATV-US-SHIP-EAN/262617923777?epid=19012045453&hash=item3d253f80c1: g:y6EAAOSwCGVX4pJR:rk:3:pf:0
I was using our big air powered extraction pump. The good side it took like 30 secs. The bad side it was hard to back the trailer to where we had it. So I bought one of those cheap electric oil extractors, maybe $25. Works well enough, a little loud and slow but easy and clean.
I use that Amazon one. Works great. Word of warning though, don’t turn it over or upside down. If you do oil will shoot out the front b