Anybody have any Laser 220 pictures?

[silverbullet02]

Gonna take the 2.0 off and put on a laser injected 2.5, just need to see how the front cowl bracket is physically mounted to the motor. Thanks!

[JOE54]

BULLET they had a latch assembly just like the carbed mtrs that bolted under air b ox why not just put later style cowl on it

[silverbullet02]

Yeah, I'm just wondering what I'd have to fab up to make the bracket off the 2.0 work if I can't get a hold of the factory one. I'm assuming the mounting holes to the air box are a bit different than a carb motor. I just want to keep the same look on the boat. It's an '82 Glastron my dad gave me. Plus the splashwell is kinda narrow and the wider cowls really take up a lot of room in there.

[JOE54]

I think the cowl set up from 150 carb mtr will bolt right up /take brckt off carb plate and install on efi air box /cowl for 200 2.4 carb Will not

[silverbullet02]

The holes on the car box are about 1 1/4" farther forward than the ones on the front of the laser air box. I can make a bracket, just hoping to see what the factory one looked like to space it out properly.

[JOE54]

ok BULLETT I did some looking p/n for brckt from carb 2.4 is same as laser 99424/call this num 306 328 8541 merc nla list shows they have 52 in stock JOE