I know there has been talk of the RT188 trailer jack in the past but I couldn't find it in a search.
For those of you that have replaced your factory jack on the RT188 trailer, was there a model that did not require any modifications of any kind?
I know there has been talk of the RT188 trailer jack in the past but I couldn't find it in a search.
For those of you that have replaced your factory jack on the RT188 trailer, was there a model that did not require any modifications of any kind?
https://www.etrailer.com/Trailer-Jac...413140334.html
No mods. Bolted right on.
2014 Ranger RT188
Mercury Fourstroke
http://www.bbcboards.net/showthread.php?t=701184
Check out Skeeterbaits mods, one of the nicest outfitted 188s out there.
I switched mine out for a Fulton (141133) XLT Sharkskin Finish Bolt-On Swing-Away Jack (1500 lb. Weight Capacity) model from Amazon Warehouse for $69.95.
I had to get a 1" spacer to move it out enough to clear the trailer on my '16 model.
Once I did that it was well worth the time and effort it took to do it.
I can show you what I used to space it out as it was lightweight aluminum.
2016 Ranger RT188 Charcoal Metallic Dual Console
2017 Yamaha 115 VMAX SHO SS Prop
Lowrance Elite 7Ti in console
Humminbird Helix 10 SI on BBT Bow Mount
Humminbird Helix 10 SI on a BalZout @ Console
Minn Kota Ultrex 80 - 24V i-Pilot Link
Transducer Shield Mount
Custom step in place of center seat
Trick Step
Another option that you can do with the XLT jack is replace the over sized wheel with the factory jack wheel . It doesn't look bad and will allow the jack to fold without having to add a spacer
It's all good !
2016 Ranger RT188 White
Yamaha 115 sho
motorguide Xi5 80 with pinpoint gps
Lowrance elite 5 ti with total scan console
Lowrance hook 5 bow
Installed the Fulton F2 today. This jack is a beast compared to what came on the trailer.
IMG_6210.jpg
2018 Ranger RT178
Yamaha 75hp
Atlas Micro Jacker
80lb Minn Kota Ultrex
Love the winch and bow roller. The hook would dig in to the rubber bow roller and was tearing it up. The one I have now (Stoltz) is very hard and the hook glides right across it.
The jack lines up with the holes perfectly. I did have to get some longer bolts because the mount on the F2 is thicker than the original one.
Thanks
2006 Triton SP-185, 2006 Evinrude Etec 90, PowerTech NRS3, Garmin Echomap Plus 73CV & 93SV
2016 Ranger RT188 Charcoal Metallic Dual Console
2017 Yamaha 115 VMAX SHO SS Prop
Lowrance Elite 7Ti in console
Humminbird Helix 10 SI on BBT Bow Mount
Humminbird Helix 10 SI on a BalZout @ Console
Minn Kota Ultrex 80 - 24V i-Pilot Link
Transducer Shield Mount
Custom step in place of center seat
Trick Step
I used this and drilled 2 holes in it.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
2016 Ranger RT188 Charcoal Metallic Dual Console
2017 Yamaha 115 VMAX SHO SS Prop
Lowrance Elite 7Ti in console
Humminbird Helix 10 SI on BBT Bow Mount
Humminbird Helix 10 SI on a BalZout @ Console
Minn Kota Ultrex 80 - 24V i-Pilot Link
Transducer Shield Mount
Custom step in place of center seat
Trick Step
It's all good !
2016 Ranger RT188 White
Yamaha 115 sho
motorguide Xi5 80 with pinpoint gps
Lowrance elite 5 ti with total scan console
Lowrance hook 5 bow
Just an FYI that Autozone has the above mentioned jack F1413140334 for $164.99. I had already placed an order with etrailer but got a price match for the autozone price before it shipped. Also, you can adjust the jack on the frame and move it to the bottom and no spacer or any other mod is required. It fits my 15 RT178 like a glove after sliding it down.
https://www.autozone.com/miscellaneo...are/450332_0_0
See if that works.
As an added bonus I just looked and they have 20% off orders over $100 so that makes the total $131.99 which is a smoking deal. If anyone is on the fence, this is too good to pass up. It is listed for $249.87 on etrailer right now.