Trailer question

[Stratos_185]

Does anybody know what thread pitch the spindle is on a 09 721 trailer. I had a bearing the just blowed up this morning. Thank the lord I wasn’t very far from home. My fault completely for not keeping a eye on things. I made another mistake when trying to get the hub off. The washer that’s behind your axle nut has a flat slot in it make sure it is lined up when trying to pop the hub off or you will mess your threads up.

[DREWTICK]

I believe its a 1" x 14 thread

[Stratos_185]

Picked up a tap and die set from harbor freight a little while ago 3/4 is to small and 7/8 is to big must be a 13/16. It’s a fine thread I guess I’ll have to order one.

[DREWTICK]

may be 13/16 , thats a common size for trailers, I see its a 2009 might be different I think some use this spindle but it doesn't have the slot
let us know so we can add it to the trailer repair section.
https://www.easternmarine.com/1-3-8-...lange-msb2061l

[Stratos_185]

Mine looks like this but I couldn’t find it on there website.

[Stratos_185]

I don’t know how to add a link but I think I found it on eastern marine. It’s the loadrite spindle nut kit #1408.02

[DREWTICK]

I don’t know how to add a link but I think I found it on eastern marine. It’s the loadrite spindle nut kit #1408.02

https://www.easternmarine.com/loadri...ut-kit-1408-02

https://store.snapon.com/SPindle-Ret...e-P652010.aspx

[Stratos_185]

Thanks for the link on the spindle rethreader. Matco tools also makes one.

[Stratos_185]

Update on my repair. The spindle repair nut worked great. All the parts from eastern marine worked great. I’ve got to get some of the SS rings that the seal rides on mine was groved and I plan on replacing all the bearings on the trailer before tournament season starts. Anybody got a part number for it on eastern marine?

[DREWTICK]

Check out the sticky, we are keeping a parts list there
I will add a sleeve to the list http://www.bbcboards.net/showthread.php?t=932294